Your are here:
Company News
An electrical insulator is non PEEK resin
Release Time:2016-4-21 16:05:34
PEEK resinThe utility model is an ideal electric insulator, and can maintain good electrical insulation performance under the conditions of high temperature, high pressure, high humidity, etc. Therefore, the electronic information field has gradually become the second application field of the PEEK resin. The utility model can be used for the manufacture of pipelines, valves and pumps for conveying ultrapure water.
PEEK resinIt can also be subjected to up to 3000 cycles of high pressure sterilization at a temperature of 134 DEG C, which can be used in the production of surgical and dental devices requiring high sterilization and repeated use. PEEK not only has the advantages of light weight, non-toxic, corrosion resistance and other advantages, is the most close to human bone and material, can be combined with the body, so use the PEEK resin to replace the metal manufacturing human skeleton is an important application in medical field. Domestic PEEK material production development is very rapid.
PEEK resin was developed by ICI company in the late 1970s. Since its inception, it has been regarded as an important strategic defense material.
Polyetheretherketone (PEEK) as a new type of semi crystalline aromatic plastic engineering plastics, has very good physical and mechanical properties, can replace the metal, ceramics and other traditional materials in many special fields, reduce quality, improve the performance of outstanding contributions, as when one of the high performance engineering plastics today the most popular. PEEK high-temperature performance is outstanding, can be used for a long time under 250 degrees, the moment using temperature can reach 315 DEG C; the rigidity, dimensional stability, low coefficient of linear expansion, close to the aluminum metal material; PEEK has good chemical stability, good corrosion resistance to acid, alkali and almost all organic solvents. At the same time with flame retardant and anti radiation performance; performance of PEEK sliding wear resistance and fretting wear loss is excellent, especially can maintain high wear resistance and low friction coefficient at 250 DEG C; in addition,PEEKPolyetheretherketone (PEEK) as a new type of semi crystalline aromatic plastic engineering plastics, has very good physical and mechanical properties, can replace the metal, ceramics and other traditional materials in many special fields, reduce quality, improve the performance of outstanding contributions, as when one of the high performance engineering plastics today the most popular. PEEK high-temperature performance is outstanding, can be used for a long time under 250 degrees, the moment using temperature can reach 315 DEG C; the rigidity, dimensional stability, low coefficient of linear expansion, close to the aluminum metal material; PEEK has good chemical stability, good corrosion resistance to acid, alkali and almost all organic solvents. At the same time with flame retardant and anti radiation performance; performance of PEEK sliding wear resistance and fretting wear loss is excellent, especially can maintain high wear resistance and low friction coefficient at 250 DEG C; in addition。
Use: it is an engineering plastic with excellent comprehensive performance, film casting or orientation, used as a wire coating line, atomic energy engineering components, H or C electrical insulating materials, flexible printed circuit board, heat pump cabinet or rack, wells couplings, valves, metal or heat-resistant anti-corrosion coatings, monofilament, bandage, sieve, subway, mine, oil, electrical industry, Atomic Energy Engineering, chemical equipment etc.。